background image

WARRANTY INFORMATION

IMPORTANT 
Please keep your proof of Purchase and User Manual in a safe place as you will 
require these to make a warranty claim. Prior to making a claim you should read 
through the trouble shooting section in the manual and contact your supplier.
All warranty claims should be made directly to your supplier.

If within one (1) year from the date of purchase, the product fails due to a defect in 
material or workmanship, we will repair if possible or replace it free of charge with a 
comparable unit which may be new or refurbished. This warranty applies only to the 
original purchaser and is not transferable. The goods must be returned to the seller 
with proof of purchase to be assessed at the purchasers cost.

Warranties shall not apply to any defect, failure or damage caused by improper use or 
improper or inadequate maintenance and care. The manufacturer shall not be obligated 
under these warranties: 

 

a)  to repair damage resulting from attempts by personnel other than authorised

 

 

representatives to install, repair or service the product; 

 

b)    to repair damage, malfunction, or degradation of performance resulting from 

 

 

improper use or incompatible solution;  

 

c)    to perform maintenance or cleaning or to repair damage, malfunction, or 

 

 

degradation of performance resulting from failure to perform user maintenance

 

 

and cleaning as prescribed; 

 

d)    to repair damage, malfunction, or degradation of performance resulting from

 

 

use of the product in an environment not meeting the operating specifications, 

To activate your warranty, please complete the information and post to Tanning
Essentials within 14 days of purchase.

www.tanningessentials.co

Summary of Contents for PROV

















Reviews: