SPRAY APPLICATOR
STEP 1
Unscrew Solution Cup and fill ¾ full. Over filling
the solution cup may cause leaks.
STEP 2
Insert Solution Cup into applicator and screw
tightly.
STEP 3
Set Nozzle by turning, vertical position for up and
down spraying and horizontal position for left and
right spraying.
STEP 4
Adjust Solution Dial on back of gun to desired
level. A higher setting will result in more solution
spraying from the applicator. Settings of 5-7 on the
dial are most commonly used.
STEP 5
Attach Hose - Insert the longer hose fitting into the
bottom of the applicator and turn anti-clockwise
until firm and the fitting will line up with bottom of
applicator.