background image

5

4

Prior

to
Use

Prior

to
Use

For Your Safety

Prohibited

Warning

Ignoring instructions highlighted with this mark could result in
death or severe injury.

Caution

Ignoring instructions highlighted with this mark could result in
injury or damage to property.

This mark indicates actions that are prohibited.

This mark indicates instructions that must always be adhered to.

Warning

Caution

The following outlines precautionary measures to be taken to avoid injury to the users of this device
and others, and to prevent damage to property. Please familiarise yourself with the contents to
ensure the safe operation of this equipment.

Take care near water.

To  avoid damage, do not use this device near water or other
places where it may get wet.

This device must not be used on subjects with pacemakers or
other mechanical implants.

This device passes a weak electrical current through the body
which could interfere with and cause the malfunction of electrical
medical implants, resulting in serious repercussions.

To avoid injury, do not insert fingers into gaps and holes.

Avoid impacts on the display.

The acrylic screen may split and cause injury.

Quickly remove moisture from the display screen to avoid, deformity, colour
change, staining and fading.

Wipe over the impedance meter electrodes with disinfectant (alcohol, etc.) prior
to measuring.

This is to avoid the transmission of disease when the meter is placed on the
abdomen.

Use only the dedicated AC adapter and cord.

The use of other adapters/cords may result in damage or fire.

Ensure disabled persons do not attempt to use the equipment by themselves.

A companion must perform the measurements.

Continually monitor both the subject and the equipment for anomalies.

Should an anomaly with the subject or the equipment be discovered, take appropriate
action, such as stopping the equipment, while ensuring the safety of the subject.

Do not expose items sensitive to magnetic forces to the equipment.

Exposing items that may be affected by the magnetic force of the magnet on the
impedance meter (floppy disks, USB memory sticks, etc.) may result in corruption of
data.

Avoid using on subjects with allergies to metals.

Allergic reactions may be caused by the stainless steel used in the electrodes of this
device.

This device must not be used on women who are pregnant or
may be pregnant as the foetus may be affected.

Do not dismantle or modify.

There is a risk of electrocution or injury. Nor can precise analysis
be guaranteed.

Do not use double adapters.

May result in fire.

Do not interpret analysis results yourself (including evaluating
measurements and formulating exercise programmes based on
results, etc.).

Weight loss and exercise based on self-analysis could be
detrimental to your health. Always follow the advice of a qualified
professional.

Do not shine the laser beam directly into the eyes.

Damage to eyesight may occur.

always adhere to the following

Prohibited

Always…

Summary of Contents for ViScan AB-140



















Reviews: