GB
GB
FEATURES AND FUNCTIONS
PREPARATIONS BEFORE USE
Measuring Platform
1. Display Screen
2. Set Button / Memory Button
3. Arrow (Select) Buttons
4. Arrow (Select) Buttons / Data Botton
5. Ball-of-Foot Electrodes
6. Heel Electrodes
7. On / Off Key
Accessories
8. AA-Size Batteries (4)
8.
Inserting the Batteries
Open the battery cover on the back of the measuring platform. Insert the
supplied AA-batteries as indicated.
Note:
Be sure that the polarity of the batteries is set properly. If the batteries are
incorrectly positioned the fluid may leak and damage floors. If you do not intend to use this
unit for a long period of time, it is advisable to remove the batteries before storage.
Please note that since the batteries were inserted at the factory, their energy
levels may have decreased.
Positioning the Monitor
Place the measuring platform on a hard, flat surface where there is minimal
vibration to ensure safe and accurate measurement.
Note:
To avoid possible injury, do not step on the edge of the platform.
Handling Tips
This monitor is a precision instrument utilizing state-of-the-art technology.
To keep the unit in the best condition, follow these instructions carefully:
• Do not attempt to disassemble the measuring platform.
• Store the unit horizontally, and place it so that the buttons will not be
pressed accidentally.
• Avoid excessive impact or vibration to the unit.
• Place the unit in an area free from direct sunlight, heating equipment,
high humidity, or extreme temperature change.
• Never submerge in water. Use alcohol to clean the electrodes and glass
cleaner (applied to a cloth first) to keep them shiny; avoid soaps.
• Do not step on the platform when wet.
• Do not drop any objects onto the platform.
Open as shown.
Direction of the batteries.
3
1.
4.
5.
3.
2.
5.
6.
7.
Tanita Body Fat Monitor/Scales allow you to determine your body fat
percentage at home as easily as you measure your weight.
What is Body Fat Percentage?
Body fat percentage is the percentage of fat in your body. Too much body
fat has been linked to conditions such as high blood pressure, heart
disease, diabetes, cancer, and other disabling conditions.
The BIA Method
Tanita Body Fat Monitor/Scales use the BIA (Bioelectrical Impedance
Analysis) technique. In this method, a safe, low-level electrical signal is
passed through the body. It is difficult for the signal to flow through fat in
the human body, but easy to flow through moisture in the muscle and other
body tissues. The difficulty with which a signal flows through a substance
is called impedance. So the more resistance, or impedance, the signal
encounters, the higher the body fat reading.
Hydration Fluctuations
Hydration levels in the body may affect body fat readings. Readings are
usually highest in the early waking hours, since the body tends to be
dehydrated after a long night’s sleep. For the most accurate reading using
BIA, a person should take a body fat percentage reading at a consistent time
of day under consistent conditions.
Besides this basic cycle of fluctuations in the daily body fat readings using
BIA, variations may be caused by hydration changes in the body due to
eating, drinking, menstruation, illness, exercising, and bathing. Daily body
fat readings are unique to each person, and depend upon one’s lifestyle, job
and activities.
PRINCIPLES OF ESTIMATING BODY FAT PERCENTAGE
20–39
40–59
60–79
Healthy
Overfat
Obese
Underfat
Healthy
Overfat
Obese
Underfat
Based on NIH/WHO BMI Guidelines.
As reported by Gallagher, et al,
at NY Obesity Research Center.
To determine the percentage of body fat
that is appropriate for your body,
consult your physician.
10%
0%
20%
30%
40%
20–39
40–59
60–79
Female
Body Fat Ranges
for Standard Adults
Age
Male
Age
1, 2
1
2
Tanita’s patented “foot-pad”
design sends a safe, low-
level electrical signal
through the body to
determine its composition.
2