background image

3

en

Place the monitor on a hard, flat surface where there is minimal vibration to ensure safe and 

accurate measurement.
Avoid excessive impact or vibration to the monitor.

Doing so may damage the monitor or cause it to malfunction,or may cause setting to be erased.

Do not use or store this monitor in the following locations.

·  Locations that are exposed to direct sunlight, near to heaters, or exposed directly to air from air conditioning 

units, etc.

·  Locations where there are severe temperature changes or a large amount of vibration.
·  Locations with high levels of humidity or moisture.
Doing so may damage the monitor or cause it to malfunction.

Do not step on the monitor when your body is wet (immediately after a shower or bath, etc.)

Be sure to thoroughly dry your body and feet before using the monitor. Failure to do so may cause you to slip or 
fall, resulting in injury. Also, the monitor cannot take accurate measurements if your body or feet are wet.

Keep away from water.
Do not use boiling water, benzene, thinner, etc. to clean the monitor.

If the monitor becomes dirty, soak a soft cloth in water or neutral household detergent, wring it out thoroughly and 
wipe the monitor clean, then use a dry cloth to wipe the monitor dry.

Do not attempt to disassemble the monitor. Do not modify this equipment in any way.

Do not wash the monitor in water.

Do not submerge this monitor in water.

Doing so may damage the monitor or cause it to malfunction.

Be sure to insert the batteries with the polarities (+, -) in the correct position.

If the batteries are incorrectly inserted, battery fluid may leak and damage the floor. (If you do not intend to use this 
monitor for a long period of time, it is advisable to remove the batteries before storage.)

Do not use the monitor near other products such as microwave ovens that emit electromagnetic 

waves.

Doing so may cause the monitor to malfunction, preventing accurate measurements.

Another person should assist persons with disabilities who may not be able to take a 

measurement alone.

Always…

Summary of Contents for BC-G01













Reviews: