Sending Measurement Data to Your iPhone
When instructed to by the app, press and hold the
“ ” button
of
the Activity Monitor for two seconds or more.
“ ” is displayed after this, indicating that a connection can be made
within the next two minutes. (“ ” flashes during communication.)
The measurement data is sent to the iPhone and “ ” turns off.
REQUEST
・
Measured values are recorded to the memory once every hour on the hour. To ensure that accurate measure-
ment data is sent, we recommend that you do not send data within five minutes before or after the hour.
→
This may cause data loss if the clock of the Activity Monitor is not accurate.
・
Try to send measurement data each day
→
The Activity Monitor can store 15 days of data (including the current day), but from the 16th day, the
oldest data is overwritten with the new data.
・
Measurement data cannot be sent to multiple iPhones.
→
Data that has already been sent cannot be resent.
Collecting Your Measurement Data
12
TOP
“ ” Button
How to Use
If "Re-connection" is displayed in the app, tap it to operate
your device.
NOTE :
To cancel communication after “ ” is displayed, press and
hold the “ ” button for two seconds or more. To avoid data
loss, communication cannot be canceled while data is being
sent (while “ ” is flashing).
If the connection fails, follow the steps above again.
Refer to each app for instructions on how to use the apps.
Select "Input Data"
→
"Steps"
→
"Input from device".
NOTE :
NOTE :
