Tangent MCS-650, Instruction Manual

Page: 12 / 36

12
6. HDMI output
HDMI output for connection to a Monitor or TV set.
7. CVBS output and inputs
Video output for connection to a TV set or monitor.
Video inputs for the AV1 and AV2 inputs
8. AUX, AV1 and AV2 analog stereo inputs.
Analog inputs for an auxiliary stereo source and a analog tape recorder.
9. Component video input and output
Component Video (YPbPr/YCbCr) output for connection to a TV set or monitor.
Component Video (YPbPr/YCbCr) inputs for the AV1 and AV2 inputs
10. Analog record output
Analog output for an auxiliary stereo tape recorder or another source.
11. Subwoofer output
Pre output signal for connection of an active subwoofer.
12. Scart input and output
Scart output for connection to a TV set.
Note: Press the AV2/TV button on the remote twice to get the sound from your TV set through the
speakers connected to the MCS-650.
13. Mains power input.
Connect the AC power cord to this jack when the installation is complete. To ensure safe operation, use
only the power cord supplied with the receiver. If a replacement is required it must be of the same type
and capacity.