Tangent HT-50, Operating Instructions Manual, Page: 12 / 30

This well-designed DVD receiver provides
optimum sound quality when the speakers used
are within the range of their rated impedance.
Im p o r t an t
The minimum impedance of the five speaker
terminals is 4 ohm; for the subwoofer, it is
8 ohm.
If you want to use only one speaker or listen
to monophonic music, do not parallel connect
individual speakers to the left and right
channel terminals. See the figure on the left
below.
Co n n ec t i n g Sp eak er Cab l es
1.Peel off approximately
1/ 2
of cable
insulation
2.Tighten the wire end (#2 below)
3.Open cable terminal by pressing back on
tab
4.Insert wire end into terminal
5.Release tab; make sure wire is in terminal
securely
No t e:: To prevent damage to the circuit, care
should be taken to prevent short circuiting from
occurring at the positive and negative poles of
the speaker cord.
"
CONNECTING
SPEA K ERS
SCART IN/OUT
ITEM NO.:
Tangent HT-50
90W
230V ~ 50Hz
11055.01
1105501000001
11
1 2
3 4
5
ï ï ï ï ï ï
Surround-speaker Surround-speaker
Front-speaker
Front-speaker
Center-speaker
Subwoofer