Tangent CINQUE CD-FM, Manual

Page: 13 / 196

13
RDS
This radio features RDS (Radio Data System) on FM. This will give you the possibility to see
which station you are listinging to and get information from the station on the display. The
RDA information will automatically be displayed in the LCD display whenever it is available.
Note: Please notice that these information are not available on all station.
Saving a station to a preset.
If you want to save a channel under one of the 12 presets, you must press down the button
with the number concerned for two seconds. When the channel has been saved and you
wish to listen to that channel, press the button with the number that you have saved the
channel under. The procedure is the same for both FM and AM.
Channels that have not been saved can be selected or retuned by means of the TUNE knob
on the front panel.
AM mode
When the radio is on, select AM mode by pressing the MODE button until the message
below appears in the display.
Scanning for station in AM mode
To scan for stations in AM mode, press the SEEK+ or SEEK- buttons to scan either up or
down in frequencies. The radio will then search for the first coming available station, and
stop when it has found that.
It is also possible to tune manually by pressing the TUNE LEFT or TUNE RIGHT buttons or
turning the TUNE button on the front panel. Turn the TUNE button on the front panel
clockwise to tune up in frequency and counter clockwise to tune down in frequency.
Saving a station to a preset.
If you want to save a channel under one of the 12 presets, you must press down the button
with the number concerned for two seconds. When the channel has been saved and you
wish to listen to that channel, press the button with the number that you have saved the
channel under. The procedure is the same for both FM and AM.
Channels that have not been saved can be selected or retuned by means of the TUNE knob
on the front panel.
AUX mode
The unit has an auxiliary stereo input. This input can be used to connect an external CD
player or similar to. To select the auxiliary input, press the MODE button. Press the MODE
again to change back to listen to radio.