4
General Instructions
Nozzle Installation:
Note: Nozzles should be installed
first.
1. Shut off water supply and drain
lines. Apply Teflon tape or pipe joint
compound to threaded end of no.
12
.
2. Tighten no.
12
firmly by hand into
no.
1
.
12
apply Teflon
tape to
threads
before
installing
no.1
Faucet Installation:
1. Drill
(2)
two holes, approximately
1-1/4” [3 cm] diameter in wall with 3”
[7 cm] vertical centers, where you are
installing no.
1
.
3
[7 cm]
2. Apply Teflon tape or pipe joint
compound to water supply lines.
3. Connect no.
7
to water supply lines
by attaching no.
8
with eccentric
centers
onto nipple
supplied by
others
and tighten no.
8
against wall.
Make sure no.
11
is in place.
Nut
behind wall to be supplied by others
.
Trim supply lines if necessary.
water supply line
11
8
wall
water supply line
nut
(supplied by others)
(supplied by others)
8
1
4. Turn on water supply and check
for leaks.
