background image

Installation and 

Maintenance

Instructions

Limited One Year Warranty

 T&

S warrants to the original purchaser (other 

than for purposes of resale) that such product is 
free from defects in material and workmanship for 
a period of one (1) year from the date of purchase.  
During this one-year warranty period, if the product 
is found to be defective, T&S shall, at its options, 
repair and/or replace it.  To obtain warranty service, 
products must be returned to...

T&S Brass and Bronze Works, Inc.

Attn:  Warranty Repair Department

2 Saddleback Cove

Travelers Rest, SC  29690

  Shipping, freight, insurance, and other 
transportation charges of the product to T&S and 
the return of repaired or replaced product to the 
purchaser are the responsibility of the purchaser.  
Repair and/or replacement shall be made within a 
reasonable time after receipt by T&S of the returned 
product.  This warranty does not cover Items which 
have received secondary 

fi

 nishing or have been 

altered or modi

fi

 ed after purchase, or for defects 

caused by physical abuse to or misuse of the 
product, or shipment of the products.
  Any express warranty not provided herein, and 
any remedy for Breach of Contract which might 
arise, is hereby excluded and disclaimed.  Any 
implied warranties of merchantability or 

fi

 tness 

for a particular purpose are limited to one year in 
duration.  Under no circumstances shall T&S be 
liable for loss of use or any special consequential 
costs, expenses or damages.
  Some states do not allow limitations on how 
long and implied warranty lasts or the exclusion or 
limitation of incidental or consequential damages, 
so the above limitations or exclusions may not apply 
to you.  Speci

fi

 c rights under this warranty and other 

rights vary from state to state.

 

P/N:  098-011395-45  Rev.1

 Date: 

06-03-11

 Drawn: 

TEH

 Checked: JRM 

06-06-11

 Approved: JHB 

06-06-11

PRE-RINSE UNIT

B-0131

(Also for 

B-0111

B-0121

B-0141

B-0171

)

Deutsch:  Installation- und
                     Wartungsanleitungen

Español:  Ia Instalación y las Instrucciones   
                    de Mantenimiento

Français:  Ies Instructions d’Installation et 
                    d’Entretien

Summary of Contents for B-0131









Reviews: