13
All the controls are located on the equipment's front panel, together with all input and output
connections. The instrumentation is mounted on a sub-chassis which, in turn is mounted to the front
panel via a shock absorbing system. The instrumentation is further protected by means of a
polycarbonate cover to prevent damage to the instruments’ front faces.
The PT30-10 is housed in a padded bag for maximum protection during transit.
1.9
Storage
The PT30-10 when not in use must be stored in a dry environment, corrosion damage may occur to the
HV components if stored in damp environment.
Note:
If the unit is moved from a cold area to a warmer area condensation could form on the HV
components, this would greatly reduce the internal breakdown voltage.
If it is suspected that condensation may have formed the PT30-10 should not be used until its
temperature has stabilised and any condensation evaporated.