Basic Usage
17
Start Recording via Base Unit
By pushing the REC button you can begin recording immediately as well as set or
change the recording interval
1.
Set the Recording Interval by pressing the [INTERVAL] button. Each time
you press, it will take you to the next possible interval. A pause of 3 seconds
will set the interval and return you to the main display.
10 seconds
10 minutes
2.
Start Recording by pressing down on the [REC/STOP] button for more than
2 seconds; the REC lamp will appear lit on the display.
- With some computer models, even though you have set a programmed start and the
unit is in waiting mode, by pressing [REC/STOP] recording will begin immediately.
- While recording, Recording will stop if you hold down the [REC/STOP] button for
more than 2 seconds.
- If you want to make any changes to the settings other than recording interval please
see [Start Recording Via Computer]
Note:
If you press on the [REC/STOP] button when the REC lamp is not lit, the next recording will
begin and any former data will be automatically deleted.
-
When you want to stop a recording session press the [REC/STOP] button for 2 or
more seconds.
- When you want to check the recording interval while recording press the [INTERVAL]
button and it will appear on the display. YOU CAN NOT MAKE CHANGES WHILE
RECORDING.
