13
Main Display Messages
The following are the main display messages that appear
on the LCD display.
FULL (The data capacity is FULL)
Upon reaching capacity of 8,000 readings, "FULL" will appear
on the LCD display. When this message appears, recording has
been stopped. (Only when recording in ONETIME mode will this
be displayed.)
Sensor Error
This will be displayed when a sensor has not been connected,
has not been completely inserted or the wire has been broken.
Measurement and recording will continue so battery power will
be consumed.
SLP (Sleep Mode)
If the battery power becomes extremely low, this message will
appear on the LCD display. When this appears, recording has
been stopped in order to save the already recorded data. See
"Changing the Battery" on page 16 and change the battery.
