9
In sleep mode all normal operations will stop and it will become
impossible to switch on the power of the Unit.
NOTE:
If the Unit remains in sleep mode for about 2 months without a change of battery, or
if the battery is left out of the Unit for more than 2 minutes, all recorded data will be
lost.
- Current Readings Monitoring Display
With our exclusive software, you cannot only monitor the current
measurements at a set interval, but can view those measurements in a
continually changing graph. You can simultaneously display the current
measurements and corresponding graphs for the number of Units you
have connected.
- 15 Recording Intervals
Select from 15 recording intervals (from 1 second to 1 hour) to meet
your needs.
Also, there are two recording modes to choose from: ONETIME and
ENDLESS.
ONETIME: Upon reaching capacity of 8,000 readings, "FULL" will
appear on the LCD display and recording will automatically stop.
ENDLESS: Upon reaching capacity of 8,000 readings, the oldest data
is overwritten and recording continues.
- Adjustment Function
By entering the adjustment values beforehand, it is possible to view
and record the adjusted measurement values.
Adjustment values are written directly into the sensors themselves, not into
the Units. Therefore, when replacing a sensor, it is necessary to re-set any
desired adjustment settings into the newly connected sensor. Note that when
replacing one sensor in which adjustment settings have been made with
another one in which adjustment settings have been written, the original
sensor’s adjustment values will become invalid and the newly connected
sensor’s adjustment values will become valid.
