18
Main Display Messages
The following are the main display messages that appear on the
LCD display.
FULL (Storage Capacity FULL)
Upon reaching storage capacity of 8,000 readings, "FULL" will appear on the
LCD display. When this message appears, recording has been stopped. (Only
when recording in ONETIME mode will this be displayed.)
Sensor Error
This will be displayed when a sensor has not been connected, has not been
completely inserted or the wire has been broken. Measurement and recording
will continue so battery power will be consumed.
- Measurement and recording will continue so battery power will be consumed.
- If after re-connecting the sensor, measurements are still not displayed, it is very
possible that the Sensor or the Unit is defective or has been damaged.
SLP (Sleep Mode)
If the battery is not changed and power becomes extremely low, this message
will appear on the LCD display. When this appears, recording has been
stopped in order to save the already recorded data. See "Changing the
Battery" on page 22 and change the battery.
Nothing Appears
If after going into sleep mode above, the battery is further left unchanged the
display will automatically shut off. If that occurs, all recorded data will be lost.
See "Changing the Battery" on page 22 and change the battery.
