8
TC42.NG05.C 160508-12
Minimum
rate screw
NG
LP
Fig #23
Fig #24
Fig #25
Fig #26
10.
Replace the minimum rate screw with the
one provided in the propane conversion
kit supplied with this fi replace. Ensure
that the screw is fully installed.
(Fig.
#23)
11.
Pull off the rubber cap from the top of
the pressure regulator. (Fig. #24)
12. Press down on the center post and
rotate 90°. The center post should
stay down. (Fig. #25). Replace the
rubber
cap.
13.
Fill in the date and the name of the
person who performed the conversion
in the white area on the conversion
label. Peel off the protective backing
and apply the conversion label directly
over the gas specifi cations on the rating
label.
14.
Attach the access panel to the side of
the fi rebox with the previously removed
screws. (Fig. #26)
Note:
Gasket must be installed with access
panel.