Propane Conversion
If the unit is to be used on propane,
convert as follows using the compo-
nents supplied with this fi replace:
CAUTION
The gas supply and electrical power
must be shut off before proceeding
with the conversion.
Fig. # 17
Fig. # 18
Fig. # 16
WARNING
This conversion kit shall be
installed by a qualifi ed
service agency in
accordance with the
manufacturer's instructions
and all applicable codes
and requirements of the
authority having
jurisdiction.
If the information in these
instructions is not followed
exactly, a fi re, explosion or
production of carbon
monoxide may result
causing property damage,
personal injury or loss of
life.
The qualifi ed service
agency is responsible for
the proper installation of
this kit.
The installation is not
proper and complete un-
til the operation of the
converted appliance is
checked as specifi ed in the
manufacturer's instructions
supplied with the kit.
Note: Factory supplied components must
be used to ensure correct input.
After conversion confi rm proper manifold
pressure.
1. Ensure the burner, pilot and gas
supply are turned off, and the
appliance has cooled.
2.
Remove the two screws securing the
manifold assembly to the burner.
(Fig.
#16)
3.
Remove the manifold assembly from the
burner. (Fig. #15)
4. With a ½” wrench remove the natural gas
orifi ce (#25) and replace with propane
orifi ce (3/32)(our part # 5021.31)
(Fig.
#18)
5. Fully open the primary air shutter.
6. Reinstall the manifold assembly
6
TC42.NG05.C 160508-12