Voyager E5784 and E5788 HD DSNG Encoder
26
5 Typical
Configurations
5.1
Single Channel DSNG Link
To put the Encoder into a typical configuration for a stand-alone ATSC
Encoder perform the following:
>
Navigate to the
Config Menu
.
>
Select Factory HD Defaults and Replace Configs.
>
Load Active Config – select the configuration which has the coding
standard and satellite bandwidth that is required.
NOTE
The transmission bandwidth factor used to calculate the bandwidth
is 1.28.
>
Adjust the Satellite Modulator parameters as required for the uplink.
It may also be necessary to modify some of the other default settings to
suit the particular installation, see the Reference Guide for details.
