Voyager E5784 and E5788 HD DSNG Encoder
18
Refer the following steps for a typical set-up. See Figure 4.1 for the
menu tree structure and Section 4.1 onwards on how to navigate the
menus. For more detailed information or parameters not mentioned
refer to the Reference Guide.
>
Select the syntax.
>
Optional - load a default configuration and amend if necessary or
restore the factory defaults. Refer to Section 5 for examples of
typical configurations.
>
Set the remote control options.
>
Set the mux options.
>
Set the video options.
>
Set the audio options.
>
Set the data options.
>
Set the Satellite modulator options.
4.1 Select
Syntax
Navigate to the
Service Info Menu
and select the Syntax option.
Choose DVB or ATSC, as required. For DSNG applications DVB syntax is
usually used. The service information for the service can then be set in
the
Service Info Menu
.
4.2
Load Default Configuration/Restore Factory Defaults
From the Summary screen navigate to the
Configs
Menu
. Select Load
Active Config and choose one of the configurations. Amend the
parameters as necessary.
4.3
Set the Remote Control Options
If the Encoder is to be controlled via its Ethernet interface the unit's IP
address and associated parameters must be set in the
Remote Control
Menu
.
Navigate to the
Remote Control
Menu
. Select the following options:
>
IP Address Option – enter or change the IP address of the unit.
>
Change other options as required.
