D 14074.03
10.2007
17
TANDBERG
VIDEO PORTAL
USER GUIDE
Table of
Contents
Trademarks &
Copyright
Patents &
Disclaimers
Safety/
Environmental
To Get You
Up and Going
Using the
Video Portal
Viewing the
System Status
Configuring
the Video Portal
Maintenance
& Upgrade
Services
Dial Plan
Examples
Contact
Information
TANDBERG
VIDEO PORTAL
USER GUIDE
Using the
Video Portal
To start the Video Portal, simply connect the
power cable, and set the power switch button
(both at the rear) to position
I
.
On the front panel of the system the power
indicator LED, marked
PWR
, will turn
GREEN
.
Power switch
Accessing the Video Portal
Forgot the Password?
The
pwrec
account is active for one minute following a restart.
Beyond that time, the system will have to be restarted to
change the password.
Video Portal Start-up
!
Reboot the Video Portal.
"
Connect to the Video Portal via the serial interface once it has
restarted.
#
Login with User Name
pwrec
.
No password is required.
$
You will be prompted for a new password.
Starting Up the Video Portal
You may access the Video
Portal by entering the IP-
address of the Video Portal
in a standard WEB-browser.
You will then be asked to
enter a password. You will
need to enter
admin
as user
name. The default password
for the Video Portal is
TANDBERG
. Remember
that the password is case
sensitive. Note that you may
also use SSH and Telnet to
configure the Video Portal.
USER NAME
is
admin
PASSWORD
. Default
password is
TANDBERG
(NB!
case sensitive)
