D14554.01—OCTOBER 2009
28
Profile 42” with Codec C20
Administrator Guide
Contents
Introduction
Getting started
About the menus
The settings menu
Settings Library
Cameras
Appendices
Contact us
Conference [1..1] DefaultCall Rate:
<64..6000>
Specify the default call rate to be used when placing calls from the system. The call rate can also be defined
directly for each call when setting up a call.
Range: 64-6000 kbps
Example:
Conference 1 DefaultCall Rate: 768
Conference [1..1] DoNotDisturb Mode:
<On/Off>
The Do Not Disturb setting determines whether or not there should be an alert on incoming calls.
On: Set to On when you do not want any alert to incoming calls. The calling side will receive a busy signal
when trying to call the codec.
Off: Set to Off when you want incoming calls to be alerted. This is the default setting.
Example:
Conference 1 DoNotDisturb Mode: Off
Conference [1..1] Encryption Mode:
<Off/BestEffort>
BestEffort: The system will use encryption whenever possible. If the far end system supports encryption
(AES-128), the call will be encrypted. If not, the call will proceed without encryption. A padlock with the text
“Encryption On” displays on screen, for a few seconds, when the conference starts.
Off: The system will not use encryption.
Example:
Conference 1 Encryption Mode: BestEffort
Conference [1..1] FarEndControl Mode:
<On/Off>
Lets you control if the remote side (far end) should be allowed to select your video sources and control your
local camera (pan, tilt, zoom).
On: Set to On when you want the the far end to be able to select your video sources and control your
local camera (pan, tilt, zoom). You will still be able to control your camera and select your video sources as
normal.
Off: When set to Off the far end can not access any of the features above on your system.
Example:
Conference 1 FarEndControl Mode: On
H323 Profile [1..1] Authentication LoginName:
<S: 0, 50>
The system sends the Authentication Login Name and the Authentication Password to a H.323 Gatekeeper
for authentication. The authentication is a one way authentication from the codec to the H.323 Gatekeeper,
i.e. the system is authenticated to the gatekeeper. If the H.323 Gatekeeper indicates that no authentication
is required, the system will still try to register. Requires the H.323 Gatekeeper Authentication Mode to be
enabled.
Format: String with a maximum of 50 characters.
Example:
H323 Profile 1 Authentication Loginname: “”
H323 Profile [1..1] Authentication Mode:
<On/Off>
On: If the H.323 Gatekeeper Authentication Mode is set to On and a H.323 Gatekeeper indicates
that it requires authentication, the system will try to authenticate itself to the gatekeeper. Requires the
Authentication ID and Authentication Password to be defined on both the codec and the Gatekeeper.
Off: If the H.323 Gatekeeper Authentication Mode is set to Off the system will not try to authenticate itself to
a H.323 Gatekeeper, but will still try a normal registration.
Example:
H323 Profile 1 Authentication Mode: Off
H323 Profile [1..1] Authentication Password:
<S: 0, 50>
The system sends the Authentication Login Name and the Authentication Password to a H.323 Gatekeeper
for authentication. The authentication is a one way authentication from the codec to the H.323 Gatekeeper,
i.e. the system is authenticated to the gatekeeper. If the H.323 Gatekeeper indicates that no authentication
is required, the system will still try to register. Requires the H.323 Gatekeeper Authentication Mode to be
enabled.
Format: String with a maximum of 50 characters.
Example:
H323 Profile 1 Authentication Password:
H323 Profile [1..1] CallSetup Mode:
<Direct/Gatekeeper>
The H.323 Call Setup Mode defines whether to use a Gatekeeper or Direct calling when establishing H323
calls.
Direct: An IP-address must be used when dialling in order to make the H323 call.
Gatekeeper: The system will use a Gatekeeper to make a H.323 call. When selecting this option the H323
Profile Gatekeeper Address and H323 Profile Gatekeeper Discovery settings must also be configured.
NOTE! Direct H.323 calls can be made even though the H.323 Call Setup Mode is set to Gatekeeper.
Example:
H323 Profile 1 CallSetup Mode: Gatekeeper
H323 Profile [1..1] Gatekeeper Address:
<S: 0, 64>
Specifies the IP address of the Gatekeeper. Requires the H.323 Call Setup Mode to be set to Gatekeeper
and the Gatekeeper Discovery to be set to Manual.
Format: String with a maximum of 64 characters.
Example:
H323 Profile 1 Gatekeeper Address: “10.47.1.58”
The Conference settings,
cont...
The H323 Profile settings