manualshive.com logo in svg

TANDBERG ENTRYPOINT, Administrator'S Manual

Share
Download
TANDBERG ENTRYPOINT Administrator'S Manual Download Page 32

D 14050.04
10.2007

32

Table of 

Contents

Trademarks & 

Copyright

Patents & 

Disclaimers

Safety/ 

Environmental

To Get You  

Up and Going

Using the 

Entrypoint

Viewing the 

System Status

Configuring  

the Entrypoint

Maintenance  

& Upgrade

Services

Dial Plan 

Examples

Contact 

Information

TANDBERG 

ENTRYPOINT 

USER GUIDE

Configuring  

the Entrypoint

TANDBERG 

ENTRYPOINT 

USER GUIDE

IP Address Assignment 

is DHCP or Static:

DHCP: 

• 

Dynamic Host Configuration Protocol 

can be selected when a DHCP server 
is present. Static IP Address, Static IP 
Subnet Mask and Static IP Gateway are 
ignored because these parameters are 
assigned by the DHCP server.

Static: 

• 

If Static assignment is used, the 

Entrypoint’s IP address, IP subnet mask, and 
the Gateway’s IP address must be specified 
in the respective IP address fields.

Select 

IP

 from the 

Configuration

 to access the 

IP Configuration

 pane.

Save. 

When ready to store 

the new settings, press 

Save

. These settings will 

take effect when the system 
has been restarted.

DNS Interface 

Up to five Domain Name 
Server IP addresses can be 
specified here. Your LAN 
administrator will provide 
the correct values for these 
fields. By default these fields 
are set to 

127.0.0.1

Date and Time Settings. 

An 

NTP server address can be 
specified here to provide the 
Entrypoint with up-to-date 
time and date information.

Restart. 

This button will 

restart the Entrypoint. 
Any changes made in the 
IP Configuration of the 
Entrypoint will take effect 
after the system has been 
restarted.

IP Configuration

IP Ethernet Speed 

provides five settings to 

choose from:

Auto

• 

 

The Gateway will negotiate detect the 

speed and duplex on the LAN.

10Half

• 

 

The Gateway will connect to the LAN 

using 10 Mbps/Half Duplex.

10Full

• 

 

The Gateway will connect to the LAN 

using 10 Mbps/Full Duplex.

100Half

• 

 

The Gateway will connect to the 

LAN using 100 Mbps/Half Duplex.

100Full

• 

 

The Gateway will connect to the 

LAN using 100 Mbps/Full Duplex.

IP Address

. 

The Static IP Address defines 

the network address of the Entrypoint. This 
address is only used in static mode. Your LAN 
administrator will provide you with the correct 
address for this field.

IP Subnet Mask

. 

The Static IP Subnet Mask defines 

the type of network. Your LAN administrator will 
provide the correct value for this field.

IP Gateway

. 

The Static Gateway IP address is 

set to 127.0.0.1 by default. In case of a router 
enter its address here. Your LAN administrator 
will provide the correct value for this field.

Summary of Contents for ENTRYPOINT






















































Reviews:

No comments

Brands by name

Popular brands

Load more brands