D14635.03—MAY 2010
27
TANDBERG Codec C90 and Profiles using C90
Administrator guide
Contents
Introduction
Advanced configuration
Password protection
About monitors
Audio matters
Appendices
Contact us
www.tandberg.com
SerialPort BaudRate
Specify the baud rate (data transmission rate, bits per second) for the COM 1 port on the codec. The
default value is 38400.
Connection parameters for the COM port: Data bits: 8 Parity: None Stop bits: 1 Flow control: None.
Value space: <9600/19200/38400/57600/115200>
Range:
Select a baud rate from the baud rates listed (bps).
Example:
SerialPort
BaudRate: 38400
SerialPort LoginRequired
The Serial Login setting determines whether or not there should be a login when connecting to the COM 1
port at the codec.
Value space: <On/Off>
On:
Login is required when connecting to the codec through COM port.
Off:
The user can access the codec through COM port without any login.
Example:
SerialPort
LoginRequired: On
SIP Profile [1..1] Authentication [1..1] LoginName
This is the user name part of the credentials used to authenticate towards the SIP proxy.
Value space: <S: 0, 50>
Format:
String with a maximum of 50 characters.
Example:
SIP
Profile 1 Authentication 1 LoginName: “”
SIP Profile [1..1] Authentication [1..1] Password
This is the password part of the credentials used to authenticate towards the SIP proxy.
Value space: <S: 0, 50>
Format:
String with a maximum of 50 characters.
Example:
SIP
Profile 1 Authentication 1 Password:
SIP Profile [1..1] DefaultTransport
Select the transport protocol to be used over the LAN.
Value space: <UDP/TCP/TLS/Auto>
UDP:
The system will always use UDP as the default transport method.
TCP:
The system will always use TCP as the default transport method.
TLS:
The system will always use TLS as the default transport method. For TLS connections a SIP
CA-list can be uploaded using the web interface. If no such CA-list is available on the system then
anonymous Diffie Hellman will be used.
Auto:
The system will try to connect using transport protocols in the following order: TLS, TCP, UDP.
Example:
SIP
Profile 1 DefaultTransport: Auto
SIP Profile [1..1] Outbound
The client initiated connections mechanism for firewall traversal, connection reuse and redundancy. The
current version supports http://tools.ietf.org/html/draft-ietf-sip-outbound-20.
Value space: <On/Off>
On:
Set up multiple outbound connections to servers in the Proxy Address list.
Off:
Connect to the single proxy configured first in Proxy Address list.
Example:
SIP
Profile 1 Outbound: Off
The SIP settings
The SerialPort settings
