TANDBERG Codec C90 D14128.02, System Integration Manual

Page: 90 / 130

D14128.02—NOVEMBER 2008
90
Codec C90
System Integrator Guide
Contents Introduction Getting Started Interfaces About the API xConfiguration xCommand xStatus Cameras Appendices Contact us
xStatus
xStatus Audio Input LocalInput [1..n] Name
States the name of the LocalInput with InputId n
Value space:
S: 0..100
Default value:
N/A
Example:
*s Audio Input LocalInput 1 Name: “Microphone”
xStatus Audio Input LocalInput [1..n] MixerMode
A LocalInput is a group of connectors mixed together by the stated mixermode
Value space:
Auto/Fixed
Default value:
N/A
Example:
*s Audio Input LocalInput 1 MixerMode: “Auto”
xStatus Audio Input LocalInput [1..n] Mute
States whether the LocalInput is muted
Value space:
On/Off
Default value:
N/A
Example:
*s Audio Input LocalInput 1 Mute: “Off”
xStatus Audio Input LocalInput [1..n] Channels
States whether the LocalInput is a mono or multichannel signal
Value space:
1..2
Default value:
N/A
Example:
*s Audio Input LocalInput 1 Channels: 1
xStatus Audio Input LocalInput [1..n] AGC
States whether Automatic Gain Control is enabled on the LocalInput
Value space:
On/Off
Default value:
N/A
Example:
*s Audio Input LocalInput 1 AGC: “On”
xStatus Audio Input LocalInput [1..n] Connector
States the connectors mixed together in the LocalInput
Value space:
Microphone/Line/HDMI.1..8
Default value:
N/A
Example:
*s Audio Input LocalInput 1 Connector: “Microphone.1”
xStatus Audio Input RemoteInput [1..n] CallId
The remote audio input belongs to call with this id
Value space:
Integer value
Default value:
N/A
Example:
*s Audio Input RemoteInput 23 CallId: 11
xStatus Audio Input RemoteInput [1..n] AGC
States whether Automatic Gain Control is enabled on the RemoteInput
Value space:
On/Off
Default value:
N/A
Example:
*s Audio Input RemoteInput 23 AGC: “Off
The Call status
xStatus Call [1..n] Status
Status of call.
Value space:
Dialling/Connecting/Ringing/Connected/Idle
Default value:
N/A
Example:
*s Call 11 Status: Connected
xStatus Call [1..n] Direction
Direction of call initiation.
Value space:
Incoming/Outgoing
Default value:
N/A
Example:
*s Call 11 Direction: Outgoing
xStatus Call [1..n] Protocol
Call protocol. H323 or SIP.
Value space:
H323/SIP
Default value:
N/A
Example:
*s Call 11 Protocol: “h323”