Document No.
D&TQP0302-11(0)
Revision No.
01
Page
11 of 22
Pin
Signal Assignment
Pin
Signal Assignment
1 NC
6 NC
2 RS232
RXD
7 NC
3 RS232
TXD
8 NC
4 NC
9 NC
5 GND
6.6 15pin D-Sub(Male, 2row) Connector
Pin
Signal Assignment
Pin
Signal Assignment
1
Speaker ID 1
9
Left Full Range +
2
Speaker ID 0
10
Left Full Range -
3
Center T
11
Right Full Range +
4
Center Tweeter -
12
Right Full Range -
5
Center w
13
LMNT
6
Center woofer1 -
14
AMP Ground
7
Center w
15
Speaker ID 2
8
Center woofer2 -
z
This connection is optimized for TANDBERG’s DNAM AMP system, And DNAM Identify the
speaker ID so that output appropriate audio signal to match this monitor’s speaker module.*
z
On this monitor the pin1(Speaker ID 1) must be connected to ground by using internal speaker
wiring.
Pin name
LMNT
Speaker ID 2
Speaker ID 1
Speaker ID 0
Set
digit
to
1 1 0 1
1 : must be floated
0 : must be tied to circuit ground
