StorageLoader 2U LTO
Quick Start Guide
Accessories
— These accessories are included with your library
* LVD SCSI configuration only.
Important:
Both LTO-2 and LTO-3 tape drives require Ultra 160 rated SCSI cabling, and an Ultra 3 or LVD 160 Active
SCSI terminator. The StorageLoader 2U LTO ships from the factory with these accessories.
** To prepare your own labels, refer to the Tandberg Data Bar Code Label Specification for LTO Cartridges available at: www.tandbergdata.com.
Additional Items
— You must have -or- obtain some or all the following items to complete the installation
Host computer with
adapter card installed
You need a host computer with a host bus adapter card installed. Refer to the
documentation that came with the computer and LVD SCSI or Fibre Channel (FC) adapter
card. The StorageLoader 2U LTO is configured for LVD SCSI or Fibre Channel.
Important:
Both LTO-2 and LTO-3 tape drives are Ultra 160 SCSI devices and require a
minimum Ultra 160 non-RAID SCSI host bus adapter card (LVD SCSI configuration only).
Hybrid cable
If your SCSI controller has a 68-pin
VHDCI connector, you will need to
obtain a VHDCI-to-HD SCSI cable.
Tools
You will need a #1 Phillips screwdriver.
Fibre Channel cable
If you have a Fibre Channel adapter card installed, you need to obtain a FC cable.
Power cord
(for use
outside Europe)
If you plan to use the library outside Europe, you must supply your own power
cord (see the Product Manual at www.tandbergdata.com for information about an
International 220 VAC power cord).
Backup software
You need a backup software application to manage your backup operations. Refer to
the documentation that came with the backup software and make sure it supports the
library. See www.tandbergdata.com for compatibility information.
Data and Cleaning
cartridges
(available
from Tandberg Data or
your supplier)
WARNING!
The library weighs 44 lbs (20 kg). Two people are needed to move or lift the library. Most of the weight is toward the back of the library.
WARNUNG!
Die Library wiegt 20 kg. Es sind mindestens 2 Personen erforderlich, um die Library zu bewegen oder zu heben. Der hintere Teil der
Library hat das Grö
ß
te Gewicht.
¡PRECAUCIÓN!
La biblioteca montada sobre bastidor pesa 20 kg. Se necesitan dos personas para mover o levantar la biblioteca. La parte trasera
de la biblioteca es la de mayor peso.
Page 1 of 8
Tape
Ultrium 3
(slate blue)
Ultrium 2
(purple)
Ultrium 1
(black)
LTO Ultrium
Drive
Read
Write
Read
Write
Read
Write
Cleaning Cartridge
LTO-3
Yes
Yes
Yes
Yes
Yes
No
Yes
LTO-2
No
No
Yes
Yes
Yes
Yes
Yes
HD Connector
VHDCI Connector
Power
cord
Bar code labels**
Multi-language packet
and Warranty
Rack-mount kit
(fasteners and
instructions included)
Shipping
lock
Ethernet
cable
LVD SCSI 68-pin HD
to HD cable and LVD
terminator*
