StorageLibrary T40+ Series Installation and User Guide
93
Interpreting LEDs
LEDs provide a visual indication of the status of certain library components. LEDs can sometimes
communicate that a problem exists when the RAS ticket cannot. For example, a LED can indicate a
firmware problem that prohibits the library from generating RAS tickets.
The following components of the library have LEDs:
•
Front Panel
•
Ethernet Connector
The Maintenance Menus
Table 5. Maintenance Menus - Item Name and Description
Item name
Description
Library FW upgrade
Upgrades the library FW through RMI
Prepare to Ship
When selected, the robotics is positioned for installing the transport locking
screws.
The magazines are ejected to facilitate the installation.
The library cannot be safely shipped with cartridges in the magazines.
The Prepare to ship command must be run before the library is transported,
in order to re-install the transport locking screws and to remove all cartridges
in the library. The Prepare to ship command is available at the Front Panel
Interface (
FPI
).
Reboot
Performs a hard reset of the library.
Restore default
Sets the library settings to their factory default values.
Clear WEB password
Clears the WEB password (from FPI only)
The Diagnostics Menu
Table 6. Diagnostics Menu - Item Name and Description
Item name
Description
Event log
Displays a log that contains information about library and drive configuration,
event log and error log. This log can be saved to a file or sent via e-mail to
technical support.
System test
Runs a test of the library hardware.
Cycle test
Starts a test where cartridges are moved randomly between magazine slots
and between the drive and the magazines.
