2
OF
28
G
ENERAL
I
NFORMATION
Both the StorageLibrary T24 and StorageLibrary T48 Library accommodate Ultrium 3
(LTO-3) or Ultrium 2 (LTO-2) tape drives in half height (HH) or full height (FH)
configurations. Neither library will accommodate LTO-1 tape drives.
Note:
Most of the illustrations show SCSI configurations. Use the same steps to install Fibre
Channel tape drives.
Information that is specific to the individual libraries is indicated as follows:
StorageLibrary T24
—One full height tape drive or two half height tape drives
StorageLibrary T48
—One or two full height tape drives, or one, two, three, or four half
height tape drives
!
Important
The tape drives must be specially configured (at the factory) for use in a
StorageLibrary T24 or StorageLibrary T48 library. Purchase tape drive
kits only from Tandberg Data or Tandberg-approved suppliers.
To view this information...
go to...
Installing additional tape drives
page 8
Replacing a tape drive with the same configuration
(half height -to- half height or full height -to- full height)
page 14
Replacing a half height tape drive with a full height tape drive
page 19
Reconfiguring the library
(
this step must be completed for the library to operate
)
page 25
Resuming operation
page 26
Confirming the installation
page 28
