24
R
EFERENCE
M
ANUAL
1021806
4 H
ARDWARE
& S
OFTWARE
I
NTERFACES
Host Interface – SATA III
The RDX
SATA III Dock interfaces to the Host computer via a standard SATA
receptacle. The table below summarizes the signals on the SATA Host connector.
Software Interface
RDX
QuikStor SATA III connects to a Host computer via a SATA interface. The
device uses the ATAPI command set to transport SCSI commands over the
interface. RDX
is a block-access device and the Host computer has direct access to
each logical block. File system management is controlled by the Host computer.
For information on the software interface, refer to the RDX-SCSI Specification.
Table 2:
SATA Host Connector Pins
Connector
Pin
Signal Name
SATA
Host
Connector
S1
S2
S3
S4
S5
S6
S7
GND
RX+
RX–
GND
TX–
TX+
GND
1