Tandberg Data M-Series Installation Guide
Document T6423046-02 A01
February 2004
26
Installing a Rack Mount Library
Figure 23 Installing the
Rear Shelf Clamps
7
a
Position a front shelf clamp (PN 215812) at the front of the front left
rack rail, with the bottom of the clamp approximately 15.5 inches (394
millimeters) above the bottom of the rack mount shelf.
b
Position a clamp strip (PN 217405) behind the front left rack rail,
aligning it with the shelf clamp.
c
Insert a screw (PN YS42064) through the upper hole in the front shelf
clamp, through the rack rail, and into the upper hole in the clamp
strip.
d
Insert a screw (PN YS42064) through the bottom hole in the front
shelf clamp, through the rack rail, and into the bottom hole in the
clamp strip.
e
through
to install the front shelf clamp and clamp
strip on the right rack rail.
Caution:
The top of the front shelf clamp must be no more than 580
mm above the bottom of the rack mount shelf.