Tandberg LTO HH Installation and User Manual
17
5 Software Installation
This chapter contains information for installing tape drives in the following operating system
environments:
•
Windows 2000/2003/XP
•
SCO Open Server
•
SCO UnixWare
•
Sun Solaris
•
IBM AIX
•
HP UX
•
Linux
Please see
www.tandbergdata.com
SUPPORT, [Product], Compatibility for the most current backup
application software compatibility information.
5.1 Windows 2000/2003/XP
5.1.1 Windows Tape Driver
The Tandberg LTO HH requires an additional tape driver that is available from the Tandberg website
at
www.tandbergdata.com
.
5.1.2 Windows Tape Driver Installation
1.
Right-click on
My Computer
.
2.
Select Manage, you should see the tape drive under “Other devices” with a “?”.
3.
Select the device, right click and
Properties
.
4.
Select the appropriate driver location.
5.
Follow the instructions on the screen.
5.1.3 Windows Embedded Backup Application
The Backup application is included in the Windows Operating System.
Before running the application, make sure the tape driver for your Tandberg LTO HH tape drive is
properly installed. See Section 5.1.2.
To start the application:
1.
Click on
START
.
2.
Click on
Programs
.
3.
Click on
Accessories
.
4.
Click on
System tools
.
5.
Select
Backup
.
