Tanda TX7100, Installation And Operation Manual

Page: 4 / 9

TX7100 Intelligent Optical Smoke Detector
Installation & Operation Manual
4050100265-Rev1.4-0916
TANDA UK
Specifications are subject to change without prior notice
4
1 Introduction
1.1 Overview
The TX7100 Intelligent Addressable Optical Smoke Detector is the ideal device for most applications,
due to its spiffing linear response to a wide variety of different types of smoke patterns. The unit
manufactured the sensitivity requirement of EN 54 part 7, European Standard. The unit is aesthetically
pleasing with unobtrusive design that will complement modern building designs. The unit
incorporates an intelligent processor that provides Algorithm map, inbuilt A/D converter, Drift
compensation, and Self-Diagnosis and History log.
Secure and speedy communication through the on-board processor enables the detector to make
its own decision, resulting in greater automation. In the event of fire, the integral microprocessor
analyses the signal according to factors such as signal strength and rate of increase, then confirms
these patterns with the pre-programmed fire scenarios and smoke patterns, for a faster and safer
response. Once it is confirmed, the LED indicates the sensor status and parallel sending
communication signal to the control panel. The TX7100 detector is compatible to the TX7004
Analogue Intelligent Fire Alarm Control Panel, produced by single manufacture T&A, to avoid
addressable communication compatibility problem.
1.2 Feature and Benefits

EN54-7 Compliance

Using microprocessor technology with memory capacity up to 10 events

Analogue sending and digital addressing

Provide real time algorithm to the control panel

Smart linear drift compensation

Onsite adjustable parameter

360 degree visual indicator

Removable chamber against dust and small insect

Ancillary remote indicator output

Aesthetically pleasing design
1.3 Technical Specification

Listed LPCB Certification

Compliance EN54-7:2000

Input Voltage 24VDC [16V to 28V]

Current Consumption Standby 0.6mA, Alarm: 4mA

Protocol/Addressing T&A, Value range from 1 to 254
 Sensitivity As per stipulated standard

Indicator Single LED / 360 degree Visual

Material / Colour ABS / White Glossy finishing

Dimension / Height Diameter 99.7 mm / 57 mm

Weight 145g (with Base), 90g (without Base)

Operating Temperature -10°C to +50°C

Humidity 0 to 95% Relative Humidity, Non condensing