Tanco A Series, Operator'S Handbook Manual

Page: 15 / 72

Tanco Autowrap - A200 EH
Operator’s Manual
14
A200 EH Control Box
A200EH Controller
The A200EH electronic controller activates the automatic functions of the machine and also enables the operator to manually operate the
machine. This unit should be mounted in the tractor cab within in reach and where it can be conveniently viewed by the operator. A suc-
tion pad is supplied with the controller, this should be used mount it (usually to the side window of the cab). The controller’s 12v electrical
supply is connected with a 3 pin euro plug which is compatible with the socket found on most modern tractors. If the tractor does not have
a 3 pin euro socket then one should be fitted with the power cables going straight to the battery. The controller is protected from electri-
cal overload with two 15amp fuses in an enclosure on the power cable. The controller is connected to the communication cable from the
machine with a 24 pin connector. Take care when connecting this cable and also ensure that the cables is not under strain and will not be
damaged by sharp edges or the movement of the machine.
The controller is not waterproof so it should be protected from rain and stored indoors when not in use.
6. MACHINE SETUP