Tanco 580-J, Operator'S Handbook Manual

Page: 32 / 44

- 32 -
Tanco Autowrap 580-S/J
Operator’s manual
11. Service and Maintenance
1.
All nuts and bolts should be tightened after the first hour’s use, thereafter regulary.
2. Wheel pressure should be normally kept at 42 psi depending on bale weight and field conditions.
3. Inspection moving parts for wear on daily basis.
4.
Lubrication
Drive chain & sprocket Grease every 24 hours
Main rollers Grease every 24 hours
Hinge pins on lift Grease every 24 hours
Hinge pins on main tip frame Grease every 24 hours
Hydraulic rams Grease every 24 hours
Film spool assy Grease every 24 hours
Dispenser gearboxes One shot of Grease every,
500 bales. See 6
Main spindle Grease even 4000-5000
bales
5.
Adjustments
-
Turntable drive chain: Adjust after first days work then check/adjust every 50 hours. See Fig. 8
- Gearbox Drive chain: Adjust after first days work then check/adjust every 50 hours. See Fig. 2
- Roller Drive chain: Adjust after first days work then check/adjust every 50 hours. See Fig. 3
- Main Bale Belt: See belt tracking instructions.
6.
Film Dispenser
Apply P.T.F.E. based grease to gears every 2 to 3 months.
7.
Film Adjustment
Centre of film roll must be in line with centre of bale and film mast should be vertical.