EXPERT CONTROLLER OPERATION
OPTIONAL RF REMOTE OPERATION
The RF (Radio Frequency) remote is required if you wish to operate the 1540EH
wrapper statically.
Auto Start wrap
Close Cut & Start
Load the bale
Emergency Stop
Rotate wrap arms
in reverse
Rotate wrap
arms forward
Offload the bale
Open Cut & Start
RF Receiver
The red button on the
rear of the remote must
be pressed while
pressing any other
button (except “STOP”).
- Current No. of wraps
- Target No. of wraps
- Wrapping speed (RPM)
- Bale total
- Grand total No. of bales
- Mode: Manual /Auto
Pause wrapping
Open cutter
Fast wrap arm rotate /
Resume wrapping
Pause bale rotation
(during wrapping)
Rollers in
Start Auto wrap cycle
Select Manual or Auto
4-way Menu switch:
- Set no. Of wraps
- Change/Reset Bale Sub-Total
- Access Operator Setup Menu
- Access Technician Setup Menu
- Access Manual Wrap Arm Fold
(second function on L5/R5)
Add extra wrap
Close cutter
Slow wrap arm rotate
Reverse wrap arm
Rollers out
Power on/off /
Emergency Stop
