English
30
(Original instructions)
MEANINGS OF SYMBOLS
NOTE:
Some units do not carry them.
Symbols
WARNING
The following show symbols used for the machine. Be sure that you understand their meaning before use.
Pole Saw
Side plate
fi
ling angle
It is important that you read, fully understand
and observe the following safety precautions
and warnings. Careless or improper use of the
unit may cause serious or fatal injury.
Top plate angle
Read, understand and follow all warnings and
instructions in this manual and on the unit.
File guide angle
Always wear eye, head and ear protectors
when using this unit.
File
Keep all children, bystanders and helpers
15 m away from the unit. If anyone approaches
you, stop the engine and cutting attachment
immediately.
Depth gauge
Chain oil tank capacity
Gloves should be worn when necessary, e.g.,
when assembling cutting equipment.
kg
Dry weight
(Without guide bar and chain)
Use anti-slip and sturdy footwear.
Guide bar length
L
pA, eq
ISO22868
Sound pressure level LpA by ISO 22868
Equivalent*
÷ 2
Chain pitch
L
WA
ISO22868
Sound power level LwA by ISO 22868
Racing
Chain gauge
a
hv, eq(F)
Vibration level by ISO 22867
Front or Left handle / Equivalent*
Type of chain
a
hv, eq(R)
Vibration level by ISO 22867
Rear or Right handle / Equivalent*
Depth gauge setting
K
Uncertainty
NOTE:
Equivalent noise level / vibration level are calculated as the time-weighted energy total for noise / vibration levels
under various working conditions with the following time distribution:
* 1/2 Idle, 1/2 racing.
INTRODUCTION
It is important that you read and understand your Tanaka
brush cutter owner's manual as well as this manual.
Please carefully review and observe all safety precautions
and warnings.
Careless or improper use of the unit may cause serious or
fatal injuries.
This pole trimmer attachment has been designed for certain
Tanaka brush cutters.
SAFE OPERATION
WARNING DANGER
All overhead electrical conductors and communications
wires can have electricity
fl
ow with high voltages.
Never touch wires directly or indirectly when trimming,
otherwise serious injury or death may result.
○
Review the area to be trimmed. Look for hazards that
could contribute to unsafe conditions. DO NOT operate
unit if any wires (power, telephone, cable, etc.) are
closer than 15 m (50 ft) to any part of the operator or unit.
(
Fig. 1
)
000Book̲SF-HTSF-PS.indb 30
000Book̲SF-HTSF-PS.indb 30
2019/01/17 16:11:45
2019/01/17 16:11:45
