7
· Ext.out
"Computer" in default.
Select either "Printer" or "Computer" to specify the equipment
connected to the RS-232C port.
· Inst No.
Low-order two digits of the serial number of the Test unit. This can be
used as an identification number for external connections.
· Test No.
Counter from 0000 to 9999, incremented by one at the end of each
test
· Opt.prt
Usually set Off. If a printer is connected, this setting enables the
heating rate and other data to be printed after a test.
· Sample ID
Usually set Off. This setting enables sample name input for each test.
The sample name can be added to the printer and test results.
