Van ’t Hoffstraat 12
2665 JL Bleiswijk, The Netherlands
T. 31 (0) 10 522 43 73
tv2000-4000mkI-4000DC.docx Rev. 1.06 UK 0718
E-mail: [email protected]
Website: www.tamson.com
Tamson Instruments bv
Page 4/33
ISO 9001 : 2015
NL/PRO 238239125
VAT: NL 80 66 34 984 B01
Bank account no.:
NL28 INGB 0007 350 370
NL95 RABO 0160100046
Chamber of commerce 27 16 95 41
1
SAFETY AND WARNINGS
Make sure before installing or operating the equipment to read and understand all instructions and safety
precautions listed in this manual. If there are any questions concerning the operation of the equipment or
about the information given in this manual please contact your local dealer or our sales department first.
Performance of installation, operation, or maintenance other than those described in this manual may result
in a hazardous situation and may void the manufacturer's warranty.
Never operate equipment that is not correctly installed. Unqualified personnel must not operate the
equipment. Avoid damage to the equipment, or its accessories, caused by incorrect operation.
Important:
-
When performing service, maintenance or moving the apparatus, always disconnect the apparatus
at the main's socket,
-
Proper skilled and trained personnel are only allowed to operate this equipment,
-
Take notice of warning labels and never remove them,
-
Refer service and repairs to qualified technician,
-
If a problem persists, call your supplier or Tamson Instruments bv.
2
WARRANTY
Tamson Instruments bv. warrants that all their manufactured equipment is free from defects in material and
workmanship, preventing the machine from normal operation. Tamson Instruments bv does not warranty that
the equipment is fit for any other use than stated in this manual. The manufacturer can only be held
responsible for the security, reliability and performance of the equipment, when operated in accordance with
the operating instructions, extensions, adjustments, changes and/or if repair is performed by Tamson
Instruments bv. or authorized persons only. This warranty is limited to one year from the date of invoicing. All
equipment and materials are subject to standard production tolerances and variations.
