tams elektronik WIB-11 Manual Download Page 10

English

WIB-11 | WIB-12 | WIB-13

8. Guarantee bond

For this product we issue voluntarily a guarantee of 2 years from the
date of purchase by the first customer, but in maximum 3 years after
the end of series production. The first customer is the consumer first
purchasing the product from us, a dealer or another natural or juristic
person   reselling   or   mounting   the   product   on   the   basis   of   self-
employment. The guarantee exists supplementary to the legal warranty
of merchantability due to the consumer by the seller.
The warranty includes the free correction of faults which can be proved
to be due to material failure or factory flaw. With kits we   guarantee
the completeness and quality of the components as well as the function
of the parts according  to the parameters in not mounted state. We
guarantee the adherence to the technical specifications when the kit
has been assembled and the ready-built circuit  connected according to
the   manual     and   when   start   and   mode   of   operation   follow   the
instructions.
We retain the right to repair, make improvements, to deliver spares or
to  return   the   purchase   price.   Other  claims   are   excluded.   Claims   for
secondary damages or product liability consist only according to legal
requirements.
Condition   for   this   guarantee   to   be   valid,   is   the   adherence   to   the
manual. In addition, the guarantee claim is excluded in the following
cases:

if arbitrary changes in the circuit are made,

if repair attempts have failed with a ready-built module or device,

if damaged by other persons,

if damaged by faulty operation or by careless use or abuse.

9.  EU declaration of conformity

This product conforms with the EC-directives mentioned below
and is therefore CE certified. 

2004/108/EG  on  electromagnetic.  Underlying  standards:  EN  55014-1
and   EN   61000-6-3.   To   guarantee   the   electromagnetic   tolerance   in
operation you must take the following precautions:

Connect the transformer only to an approved mains socket installed
by an authorised electrician.

Make   no  changes   to  the   original   parts   and   accurately   follow   the
instructions, connection diagrams and PCB layout included with this
manual.

Use only original spare parts for repairs.

2011/65/EG   on   the   restriction   of   the   use   of   certain   hazardous
substances in electrical and electronic equipment (ROHS).  Underlying
standard: EN 50581.

10. Declarations conforming to the WEEE directive

This   product   conforms   with   the   EC-directive   2012/19/EG   on  waste
electrical and electronic equipment (WEEE).

The Tams Elektronik GmbH is registered with the WEEE-no.
DE  37847206,   according   to.  §   6   sect.  2   of   the   German
electro regulations from the responsible authority for  the
disposal of used electro equipment.  

Don´t dispose of this product in the house refuse, bring it to the next
recycling bay. 

Page 18

D

378

47206

tams 

elektronik

Summary of Contents for WIB-11














Reviews: