background image

English

RC-Link

9. Guarantee bond

For this product we issue voluntarily a guarantee of 2 years from the
date of purchase by the first customer, but in maximum 3 years after
the end of series production. The first customer is the consumer first
purchasing the product from us, a dealer or another natural or juristic
person   reselling   or   mounting   the   product   on   the   basis   of   self-
employment. The guarantee exists supplementary to the legal warranty
of merchantability due to the consumer by the seller.
The warranty includes the free correction of faults which can be proved
to be due to material failure or factory flaw. With kits we   guarantee
the completeness and quality of the components as well as the function
of the parts according to the parameters in not mounted state. We
guarantee the adherence to the technical specifications when the kit
has been assembled and the ready-built circuit  connected according to
the   manual     and   when   start   and   mode   of   operation   follow   the
instructions.
We retain the right to repair, make improvements, to deliver spares or
to  return  the  purchase  price.   Other   claims   are   excluded.   Claims   for
secondary damages or product liability consist only according to legal
requirements.
Condition   for   this   guarantee   to   be   valid,   is   the   adherence   to   the
manual. In addition, the guarantee claim is excluded in the following
cases:

if arbitrary changes in the circuit are made,

if repair attempts have failed with a ready-built module or device,

if damaged by other persons,

if damaged by faulty operation or by careless use or abuse.

Page 18

tams 

elektronik

Summary of Contents for RC-Link





















Reviews: