![background image](http://html1.mh-extra.com/html/tams-elektronik/mcontrol-40-01607/mcontrol-40-01607_manual_3463361004.webp)
m
C
ontrol
2. Your mControl
The mControl integrates older digital Märklin** control units, which were offered as
supplements for the Märklin** Control Units 6020 and 6021, into the EasyControl digital
system. In connection with an EasyControl digital central uunit (MasterControl, RedBox or
mc²), the mControl replaces the Märklin** Control Unit.
Note: The MasterControl and RedBox Basic digital central units do not have an integrated
booster. In layouts where the booster integrated in the Märklin**Control Unit was used to
supply the layout, an external booster is therefore also required.
The mControl
receives the control and switching commands sent by the Märklin** control units
(keyboards, controls),
translates them into control and switching commands for the EasyNet data bus used by the
EasyControl digital system and
forwards them to the EasyControl central unit (MasterControl, RedBox or mc²). This sends
the commands to the vehicle and accessory decoders on the model railway layout.
Application example
Connection 1
"Controls"
for Märklin**-devices to control vehicle decoders
Control 80 or Control 80F driving consoles
other additional devices (e.g. Infra Control 80F) offered to complement
the two versions of theControl Unit
Connection 2
"Keyboards"
for Märklin** units to control accessory decoders
Keyboard 6040
Memory 6043
4