t
a
ms elektronik
LD-G-43
5.11. Auxiliary functions
Name
No.
Input values
(Default)
Remarks and tips
Reset
8
0 ... 255
Any input value restores the settings in
state of delivery.
Decoder lock
15
0 ... 255 (3)
Changing the CV values of the decoder is
only possible if the values in CV 15 and 16
are identical.
16
0 ... 255 (3)
By assigning specific values in CV 16 the CVs of decoders with the same address can be changed
separately. Application e.g. for vehicles or train formations with several decoders with the same address
(e.g. locomotive, sound, function decoders).
Note: In case of a reset, the setting in CV 16 is retained and is
not
reset to the factory settings.
Index for
higher
CV-Pages
31
0 (0)
Adjustable in DCC format only!
Function mapping
0
32
0 (42)
Adjustable in DCC format only!
Function mapping
42
Note: If different values are entered in CV 31 and/or 32, it is not possible to use the function mapping.
The settings for the function outputs and the special functions cannot be changed then.
5.12. Information
Name
No.
Input values
(Default)
Remarks and tips
Version
7
---
Readable in DCC format only!
Manufacturer
8
--- (62)
Readable in DCC format only!
Permitted modes
of operation
Readable in DCC
format only!
12
--- (53)
Defines the permitted modes of operation
for the decoder
53 = 1 + 4 + 16 + 32
1 = DC | 4 = DCC | 16 = AC | 32 = MM
Method for
function
assignment
Readable in DCC
format only!
96
--- (2)
Defines the method for assigning the
functions:
2 = Function assignment via CVs 257 to
512 in the bank selected by CV 31 = 0 and
CV 32 = 42
with CVs per function according to
RailCommunity standard
RCN-227 section 2
Configuration variables and registers | 57
Summary of Contents for LD-G-43
Page 66: ...LD G 43 tams elektronik 66 ...
Page 67: ...tams elektronik LD G 43 67 ...
