KSM-4
t
a
ms elektronik
1. Getting started
The instructions will help you step by step with the safe and proper installation and use of
your loop module. Before you start to put the loop module into operation, read this manual
completely, especially the safety instructions and the section on possible errors and their
elimination. You will then know what you have to pay attention to and thus avoid errors that
sometimes can only be rectified with a lot of effort.
Keep the instructions in a safe place so that you can restore functionality later in the event of
any malfunctions. If you pass the loop module on to another person, also give the instructions
with it.
1.1. Contents of the package
1 ready-built and tested circuit board KSM-4 (item no. 49-01146-01) or
1 loop module KSM-4 in housing (item no. 49-01147-01)
2 push-buttons
1.2. Accessories
Connection cables
The use of stranded wire is recommended for making the connections. Stranded wires consist
of several thin individual wires and are therefore more flexible than rigid wires with the same
copper cross-section. Recommended cross-sections:
Connection of the rails: > 0.75 mm²
Connection of the points: > 0.25 mm
Connection of the push-buttons: > 0.10 mm
1.3. Intended use
The loop module is intended for use in model railway layouts as specified in the instructions.
Any other use is not in accordance with the intended use and will result in the loss of the
warranty claim. Intended use also includes reading, understanding and following all parts of
the instructions. The loop module is not intended to be used by children under the age of 14.
4 | Getting started
Summary of Contents for KSM-4
Page 18: ...KSM 4 tams elektronik 18...
Page 19: ...tams elektronik KSM 4 19...
