KSM-3
t
a
ms elektronik
12.
ICs in DIL-housing
Insert the ICs into the soldered socket.
Do not touch the ICs without first discharging yourself by
touching a radiator or other grounded metal parts.
Do not bend the "legs" when inserting them into the sockets.
Check that the markings on the PCB, the socket and the IC
show to the same direction.
3.6. Performing a visual check
Perform a visual check after the assembly of the module and remove faults if necessary:
Remove all loose parts, wire ends or drops of solder from the PCB. Remove all sharp wire
ends.
Check that solder contacts which are close to each other are not unintentionally connected
to each other. Risk of short circuit!
Check that all components are polarised correctly.
When you have remedied all faults, go on to the next part.
16 | Assembling the kit
Summary of Contents for KSM-3
Page 26: ...KSM 3 tams elektronik 26...
Page 27: ...tams elektronik KSM 3 27...
