English
FCS-4
Page 32
§
using an unsuitable soldering iron, solder containing liquid acids or
similar,
§
if damage is caused by not following the instructions in this manual
or the connection diagram(s)
§
if the module has been altered and repair attempts have failed,
§
if arbitrary changes in the circuit are made,
§
if additional components are added which are not described in the
manual,
§
if the copper tracks or soldering eyes are damaged,
§
if damage occurs due to an overload of the module,
§
if connected to a incorrect voltage or current,
§
if damaged by other persons,
§
if damaged by faulty operation or if damaged by careless use or
abuse,
§
if damaged by touching components before electrostatic
discharging of the hands.
* "
Faller
" is a registered and protected trade mark of Gebrueder Faller
GmbH, Guetenbach, Germany.