![background image](http://html1.mh-extra.com/html/tams-elektronik/easysound-mini/easysound-mini_manual_3467558021.webp)
!
EasySound mini
English
8. Check list for troubleshooting
Parts are getting too hot and/or start to smoke.
Disconnect the system from the mains immediately!
Possible cause: the module is defective.
à
Send in the module for
repair.
The loudspeaker hums.
Possible cause: The supply voltage the vehicle decoder can supply is
too low.
à
Connect a buffer capacitor (min. 100 µF / 25 V) to the
module (see section 6.)
After switching on a function key no sound is to be heard.
Possible cause: The loudspeaker is connected incorrectly.
Check
the connections.
Possible cause: The EasySound mini is not connected correctly to the
SUSI interface.
Check the connections.
Possible cause: The corresponding sound file is blank or does not
exist.
Check the file and the file name.
Possible cause: The switching input #2 is connected to a function
output of the decoder and the corresponding function is switched
on
.
Switch off the function.
After passing a permanent magnet no sound is to be heard.
Possible cause: The distance to the magnet is too large or the
magnet is too weak.
Alter the position of the magnet (if possible)
or use a stronger one.
Possible cause: The magnet has been mounted incorrectly polarized.
Alter the mounting direction.
Page 21