LD-G-2
English
Page 23
1. Setting the driving characteristics - step 1
You get to this menu point automatically from the menu point „Setting
the address and the functions“ or by pushing the function key F3 when
entering the top menu level.
Setting the driving characteristic:
First select the velocity
characteristic you want to set:
Characteristic 1: Function F4 off
Characteristic 2: Function F4 on
Definition of the direction of travel:
Operate the speed knob and
check the actual direction of travel. Check if the direction of travel of
the locomotive corresponds to the direction of travel set at the central
unit. If the actual and the set direction do not correspond operate the
function key „F2“.
Switching on or off the load control:
Set now if the load control is
to be active or not in later operation.
Load control in later operation active: Function F1 off.
Load control in later operation inactive: Function F1 on.
Setting the starting velocity:
Operate the speed knob. As soon as the
locomotive moves with the desired starting velocitiy, you should switch
the function key „function” on and off once. The locomotive decoder
confirms the taking-over of the starting velocity by flashing the front
lighting of the locomotive once. Set the speed knob to "0".
Setting the maximum velocity
: Operate the speed knob. As soon as
the locomotive moves with the desired maximum velocity, you should
switch the function key „function“ on and off once. The locomotive
decoder confirms the taking-over of the maximum velocity by flashing
the front lighting of the locomotive twice.
The program automatically goes back to the start of this programming
step. You may change your settings or make the settings for the second
velocity characteristic. In order to get to the next programming step
you have to operate the direction switch.