LD-G-2
English
Page 21
Setting the dimming function:
The dimming function is set via the
speed knob. If lamps are connected speed level 0 stands for minimal
voltage at the output to be set and speed level 14 (250 on Märklin*
Control Unit 6021) maximal voltage. Confirm your setting by switching
the function key „function“ on and off once.
Setting the kick function:
The kick function is set via the speed knob
as well. Speed level 0 stands for „kick function off“, the output always
receives the voltage set during the setting of the dimming function. By
operating the speed knob you can set how long the full voltage is
applied until the voltage is adjusted to the dimmed value. The period is
extended for approx. half a second with each speed level. Accordingly,
when setting the speed level 14, the full voltage is applied for approx. 7
seconds before the chosen dimmed value is set. Confirm your setting
by switching the function key „function“ on and off once.
Repeat the assignment of the function keys and the setting of the
dimming and the kick function for the other three function outputs. You
can skip the programming of an output that is not occuppied by
switching on and off the function key „function“ three times.
As soon as all functions are set the connected lighting flashes several
times. You automatically proceed to the menu point „Setting the driving
characteristics“.
If you want to close the programming mode you just disconnect the
locomotive.