Tamron 180-View 180NT-P-CM, Owner'S Manual, Page: 33 / 39

Configuring the Camera and Image Settings
1
1
Mode Setting (Output Screen Selection)
Here, you set the ON/OFF status of the following features: Screen distortion com -
pensation, motion detection tour, auto sequence. In addition, you can configure the
distortion compensation per screen block.
Setting Details
Distortion compensation
(OFF)
When turned OFF, the distortion compensation is
disabled, and the raw image from the fisheye lens is
displayed.
Distortion compensation
(120deg/180deg)
Displays an image by compensating the horizontal
angle of view by 120 or 180 degrees.
Motion Detection Tour Enables the motion detecting tour feature. In the MD
Tour mode, when a moving object is detected in the
selected area, that area is automatically displayed.
→ For setting the area, see "Motion Detection Tour
Program" (page 15)
Preset Sequence Turns ON the auto-sequence feature.
→ For setting the area, see, "Preset Sequence Pro -
gram" (page 14)
Preset Top Left (1),
Top (2),
Top Right (3),
Left (4),
Midl M (5),
Right (6),
Bot Left (7),
Bottom (8),
Bot Right ()
Select the preset areas to display.
Top Left (1) Top (2) Top Right (3)
Left () Midl M (5) Right (6)
Bot Left () Bottom (8) Bot Right ()
Tour speed Set the panning and tilting speed when moving in the
preset area.